Quantcast
Channel: Kodi Community Forum - All Forums
Viewing all 85666 articles
Browse latest View live

How to launch games from Kodi file browser?

$
0
0
I'm trying to figure out how to directly launch Linux games from Kodi, without going through a launcher add-on.  To be clear - I'm talking about running native Linux games, not ROMs or games through wine or steam or some other intermediary layer.

I know Kodi doesn't have full library, but according to https://kodi.wiki/view/Game_management I can add a source for Games (which I've done), and would expect I could at least browse to it (which I can do) and run files from with in it (which I can't).  I'm not sure what I'm missing, but I'm not really clear on what I even can or can't do with Kodi here, so not sure how to proceed with troubleshooting.

At this point I have the following directory added as a games source:

/home/media/data/games/PC/Kodi
└── Slay the Princess
    └── Slay the Princess.sh

My intention is to essentially have a list of scripts or links in this directory that can be used to launch any installed game.

When I browse to Games in the Estuary UI, the content window only gives me choices to "Enter add-on browser" or "Remove this main menu item".  But if I select Games, it takes me to a file browser where I can add sources.  I added a source for the above directory as mentioned, and when i browse into the source I see the Slay the Princess directory, but when I enter the directory it doesn't list the launcher script.  It only seems to display directories - I created a bunch of dummy files with various extensions to see if I could get it to list anything else, but I get nothing.

I don't understand the behavior at this point.  How do I get Kodi to launch a game from here?

Kodi supports videoextensions and similar in advancedsettings.xml to tell it what file extensions to load, but I see nothing like that for games.

Maybe my methodology is wrong.  I could try installing and running my games directly from that source instead of using launcher scripts, but if it's not displaying any files at all then I don't see how that would make any difference.

or maybe Kodi simply cannot browse and run games at all?  But then why even bother adding support for game sources if all it can do is browse and display only directories?

I'm obviously missing something here.  Would appreciate any pointers.

Note:  I understand I can install something like Advanced Launcher (if that even still works - I don't see it in the v21 repo), but my preference is to do this without an add-on if possible.  My goal is so basic - just browse a list of executables and run one when I hit select - that it seems like this must be possible even with the rudimentary games support built into Kodi.

kodi v21but stqrt Puto stream ends kodi, no log file and same with sly addon

$
0
0
running Win10 on desktop system, I start Pluto and click on movie, it exits to Win10.  I checked log file (no entry), ran maintenance+, and tried sly pluto addon, still the same issue.,  It is on my media play PCs.

On nb, it works fine.

It has been working for years with different versions and has happen the last 2 or 3 weeks.

Is there a fix for this?

Thanks in advance,
be safe,
PurpleB

Embuary to TMDB Helper conversion

$
0
0
New thread split off from TMDB helper thread as this will probably turn into a teaching moment for me with some help from Mike..... 

So you mentioned DialogVideoInfo.xml does it all, I can kind get behind the mentality of why, but when I look at the code there, it is baron and clearly heavily embuary script dependant, and following the minimal example, I can see this is going to be a not so easy conversion unless there is something I'm missing.

Here is what I see at the .xml:

xml:


<?xml version="1.0" encoding="utf-8"?>
<window>
    <defaultcontrol>9000</defaultcontrol>
    <onload>SetFocus(9000,0)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper) + Skin.HasSetting(BlurEnabled) + !String.IsEqual(ListItem.DBType,musicvideo) + Skin.HasSetting(VideoBlurEnabled)]">RunScript(script.embuary.helper,action=blurimg,file=$ESCINFO[ListItem.Art(thumb)],prop=blurthumb,radius=2)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper) + Skin.HasSetting(BlurEnabled) + String.IsEqual(ListItem.DBType,musicvideo) + Skin.HasSetting(MusicBlurEnabled)]">RunScript(script.embuary.helper,action=blurimg,file=$ESCINFO[ListItem.Art(thumb)],prop=blurthumb,radius=2)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper) + String.IsEqual(ListItem.DBTYPE,movie)">RunScript(script.embuary.helper,action=split,value='$ESCINFO[ListItem.Writer]',separator='" / "',prop=Writer)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper)">RunScript(script.embuary.helper,action=resetposition,container=1010||1020||1040||1050||1060||1070||1080||1090||9002)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper) + !String.IsEqual(ListItem.DBTYPE,musicvideo)">RunScript(script.embuary.helper,action=encode,string=$INFO[ListItem.Title],prop=TitleEncoded)</onload>
    <onload condition="System.AddonIsEnabled(script.embuary.helper) + !String.IsEqual(ListItem.DBTYPE,musicvideo)">RunScript(script.embuary.helper,action=encode,string=$INFO[ListItem.TVShowTitle],prop=TVShowTitleEncoded)</onload>
    <controls>
        <include content="DialogInfoCommon">
            <param name="blur">Skin.HasSetting(VideoBlurEnabled)</param>
            <param name="art">$VAR[PosterVar]</param>
        </include>
        <control type="group">
            <visible>!Window.IsVisible(script-embuary-person.xml) + !Window.IsVisible(script-embuary-video.xml)</visible>
            <include>AnimationInfoDialog</include>
            <include condition="!String.IsEqual(ListItem.DBType,musicvideo)">DialogVideoInfo</include>
            <include condition="String.IsEqual(ListItem.DBType,musicvideo)">DialogMusicInfo</include>
        </control>
    </controls>
</window>

Media/TVBox for TV for Kodi with the following requirements...

$
0
0
I have Nvidia Shield 2019 Pro up until a week ago, then there was a power cut issue at my neighborhood and my Shield subsumed to its wounds and passed away to the spirit world.
I have Denon AVR (AVR-X3800H +pre-out Amp for 11 Ch support) and 7.2.4 speakers layout, TV is TCL 75C935 and I use KodiNetflixDisney+.
No Plex or other players. So only focus on those three as my media source/player. Mainly Kodi as this is Kodi forum...

The connectivity matrix I use and prefer to remain on is: TVBox -> AVR -> TV

Now I am looking into buying a new box other then Shield and I was wondering what should I buy that supports my following requirements:
Mandatory: 4K 60
Mandatory: Passthrough Dolby Atmos over TrueHD
Mandatory: Passthrough DTSHD-MA w/DTS:X
Mandatory: HDR+ & Dolby Vision (all profiles or as close as possible that is available)
Optional: IMAX Enhanced support {DTS:X Profile 2} (for Disney+ & for Kodi future proof that Box won't limit me when Kodi supports it)
Optional: Aero 3D Support (for Kodi future proof that Box won't limit me)
Optional: Adjust refresh rate "On start/stop" (Kodi settings I need the Box to honor and execute. My TV supports it as it worked well on my Shield -> AVR -> TV)
Mandatory: 1 Gb Ethernet port (I don't use WiFi so i don't care about WiFi support Level)
Optional: VPN Client installation Support (NordVPN, etc.)
Mandatory: Widevine L1
Mandatory: Netflix/Disney+ full capability Support on the highest available content at their platform (Video/Sound) without the TVBox limiting me.

Mandatory = Must have
Optional = Nice to have

Shield 2019 Pro supports most of those things I listed but I want to explore other new TV box options as it is 5 years old now this box/tech..

Any suggestion?

Kodi resetting itself

$
0
0
Why does Kodi sometimes randomly revert back to original settings? Installed on Nvidia Shield. Sometimes I'll start it up and it will be as if I had just installed it. Any idea why this happens? Any way to avoid this?

Unable to add new WD Mylcoud share to Kodi through SMB or NFS

$
0
0
Bought a new 8tb MYcloud home and have attempted all my known ways to set up shared drive on Kodi through Nvidia Shield

The drive will show up in Wondows network  but when i click on it it says 'connection timed out'

I have another older Mycloud setup and it works fine though SMB and NFS

I cant access the new Mycloud to change to static IP but the IP address has not changed yet- I also can not access it, (the dashboard is limited) to alter shared folder settings. I can do all this on the older drive

Any ideas?

Trying to update source with new nfs ip freezes kodi

$
0
0
Sony TV, version 21.0.1

Router died, so had to replace it. Uses a different network (10.1.1.1 vs 192.168 etc). Try to change the network address of the video sources (there are 4 using this NFS) via the edit source menu, but when hitting ok the system freezes and can only be exited by force quitting. Doesn't seem to be anything adding to the logs, debug logs don't output any errors. CPU/Mem overlay freezes entirely

Tried also navigating to nfs via file management and also freezes. I tried removing the sources entirely, but when I hit Network File System, it crashes again. Looking at the logs it's still got the old IP address in there, GetPlayers is hitting the old address for no reason, but there are no actual errors and that's all there is. I can't edit Network File System, and adding a new network location won't connect, or save the new ip address (it just keeps reverting to straight nfs://).

Only way I can connect the source is manually adding the nfs ip address, but then trying to watch anything that has been imported just crashes again, because it's trying to access the old ip. Basically, seems the only way to fix this is to completely remove all config and start again.

Poster, Fanart and NFO file not working for Movie Extras

$
0
0
My file structures is as follows:

Movie
-Movie.mkv
-Movie-poster.jpg
-Movie-fanart.jpg
-Movie.nfo
-Extras
--ExtraName.mkv
--ExtraName-poster.jpg
--ExtraName-fanart.jpg
--ExtraName.nfo

After playing with settings for a few hours (I am very new to KODI) I was finally able to get the poster for the extra to show up when I click on extras in the movie information window. I have not been able to get the fanart or the name contained in the NFO to show up. I am even unable to select a fanart file manually.

Can anyone tell me what I'm doing wrong?

libretro.opera (3do) not finding Bios

Project Kodi - Repository

$
0
0
Project Kodi - Repository Addon - English:
Current Version: 1.0.1

Instructions for adding this repository:
  • Go to the Kodi file manager.
  • Click on "Add source".
  • The path for the source is: https://Project-Kodi.github.io/ (Give it the name "Project Kodi Repository").
  • Go to "Addons".
  • In addons, install an addon from zip. When it asks for the location, select "Project Kodi Repository", and install repository.project.kodi-1.0.1.zip.
  • Now the repository is available in Kodi.
  • Additionally, you should turn on automatic updating: Go to “Addons”, select “User Addons”, then “Addon Repository”, select “Project Kodi Repository” and activate automatic updating.

Instructions for installing addons from Project Kodi Repository:
  • Go to "Addons", select "Install from repository".
  • Select the "Project Kodi Repository".
  • Go into the accordingly section in the repository (video-plugin, scraper,..), and you'll find the apps
  • Kodi Addons:

Addons:
  1. Github Source (EXE/PY Versions) https://github.com/Project-Kodi/texturecache.py
  2. Web: https://Project-Kodi.github.io/texturecache.py/
  1. Web: https://project-kodi.github.io/Informati...db.python/

Are you a sports series collector? Then try The Sports Database Python: metadata.thesportsdb.python!
----

Project Kodi - Repository Addon - German:
Current Version: 1.0.1

Anweisungen zum Hinzufügen dieses Repositorys:
  • Gehe zum Kodi-Dateimanager.
  • Klicke auf „Quelle hinzufügen“.
  • Der Pfad für die Quelle lautet: https://Project-Kodi.github.io/ (Gib ihm den Namen "Project Kodi Repository").
  • Gehe zu "Addons".
  • In Addons, wähle: „Aus ZIP-Datei installieren“ . Wenn du nach dem Ort gefragt wirst, wähle "Project Kodi Repository" aus, und installiere repository.project.kodi-1.0.1.zip.
  • Jetzt ist das Repository in Kodi verfügbar.
  • Zusätzlich sollte man die automatische Aktualisierung einschalten: Gehe zu "Addons", wähle "Benutzer Addons", danach "Addon-Repository", wähle "Project Kodi Repository" und aktiviere die automatische Aktualisierung.

Anweisungen zum Installieren von Add-ons aus dem Project Kodi Repository:
  • Gehe zu "Addons", wähle "Aus Repository installieren" aus.
  • Wähle "Project Kodi Repository" aus.
  • Gehen in den entsprechenden Abschnitt im Repository (Video-Plugin, Informationsanbieter,..), und du findest die Apps.
  • Kodi Addons:

Addons:
  1. Github Source (EXE/PY Versions) https://github.com/Project-Kodi/texturecache.py
  2. Web: https://Project-Kodi.github.io/texturecache.py/
  1. Web: https://project-kodi.github.io/Informati...db.python/

Sind Sie ein Sammler von Sportserien? Dann probieren Sie The Sports Database Python aus: metadata.thesportsdb.python!

BBC Iplayer constantly buffering

$
0
0
I've been using BBC Iplayer add-on for a long time without issues. A few days it started buffering every 30 seconds making everything unwatchable.

I uninstalled the add-on and said to remove all data. But when I re-installed it the add-on remembered the last programme I watched, so I assume not all data was removed.

Other streaming services and video files play fine with no buffering. I can also use BBC iPlayer on Kodi on my main PC with no buffering.

How do I completely remove all BBC iPlayer data and reset it back to a completely new installation?

I'm having major problems trying to get anything to work on Kodi

$
0
0
After a number of re-installs I have got some video add-ons to work but most fail.

Specifically I'm trying to get Catchup TV and Viivx to allow me to play UK videos. I am in the UK.

It would be so much easier if Video add-ons were listed by country/language as nearly all of them seem invalid for me. But I would expect to me able to play the above two.

Fox..com also fails.

I have created an account on ITVX and can login  But then I get numerous errors. A favorite kodi error message is "one or more items failed to play. Check log for more details". I wish kodi would just tell me why it failed.

With catchup.tv I get all sorts of errors. Sometimes it is about some route... I know not what.... and other times it is that an object has no attributes.

I installed Kodi on a Windows PC to test. When I try to run any of those add-ons Kodi just crashes.

I'm trying on Windows before trying on a Vero4k. On that it doesn't crash but nothing works.

The log file from the vero4k is https://past.somc.tv/baberebapu

If anyone can help me get past this point I'd appreciate it. I've spent nearly 3 days trying to get things to work and failed.

Removing overlay icon in list view (kodi 20.5)

$
0
0
After reinstall I can't figure how to remove this icon/overlay when scrolling folders in list view. I could swear I had it removed it in previous install but can't figure it out this go-around. It's unnecessary to me and blocks the banner.
Thank you.

Image

Confluence 5.0.6

$
0
0
I would like to set "Favorites" for default Start Up Item but seems not allowed? I think it worked on an earlier release but disabled now?

New Channels

$
0
0
Could Dirtvision and FloRacing to added?

Video resume from NFS stopped working after some version

$
0
0
Hello,

In past 3-4 months I would say NFS resume video stopped working. Here is how to replicate the problem:
1) start some .mkv file (1080p) and pause it
2) wait for 5min
3) resume - picture frozen, getting buffering display, sound choppy

here is log
https://paste.kodi.tv/ocobegakuj.kodi

Kodi is marked incompatible with your device.

$
0
0
I rooted my LG 43LJ617T TV and tried to install Kodi using webOS dev manager. While doing so it shows "Kodi is marked incompatible for your device."

"This app is not compatible with your webOS version".

I installed it anyway and it installed successfully. But when I tried to launch it, it just shows the loading page with the Kodi logo and then crashes.

Please help me to fix this issue.

TV Model: 43LJ617T
Software Version: 06.10.35

Drive multi TV (running kodi) by DLNA

$
0
0
Hi, my friend has built a fast food, he's using 3 TV 32" to show clients the menu, offers, and so on, using an USB stick for each TV, he is bored to take the staircase, go up to all tv, remove the stick, update it and place it again, he would use an automatic system using network, ha has a free WIndows PC for that.

He has dream to show separate contents separately by a playlist from a PC to each TV, were is possible to indicate medias (lovely if they can be images and videos) and time (first image will stay 10 seconds, the second photo 15 seconds, the third video till the end, then loop again to first image, etc); I don't mean that the next TV has to show the "extend image" of the first TV and so on, just different indipendent content.
The TV are connected by ethernet cable under the same LAN, I've installed Kodi, activated all services and noticed I can send by DLNA files from my phone, so I guessing there is a software for Windows able to push in the same way, but to 3 different TV, maybe I have to run 3 istances of the same program?

Which program can I use to push DLNA to Kodi?

There is another way to obtain that, streaming, but this require to encode real time a video and send stream to TV,  there are 3 TV, encoding 3 times is really a waste of CPU and quality, with risk the TV quits from streaming and needed to join it again manually.
Instead, DLNA doesn't encode, and stimulate TV to receive something new, is something went wrong before it will fix itself.
Thank you for your suggestions

Watched Status

$
0
0
I've uninstalled Kodi on my Pi and deleted the .kodi folder containing the databases. When I reinstall it and do a rescrape, it shows some of my movies as In progress movies! Where is the watched status saved? I thought deleting the databases would be enough. Any ideas where else it may be saved?

Refresh function under Information no longer works correctly in Kodi 22?

$
0
0
Hi,

I am running Android Kodi 64 bit arm on an NVidia Shield latest model. Most functions work great and its fairly stable. One thing I notice though is that when you go to "Information" for a video then try the "Refresh" function, instead of getting matches for the video like in previous versions I get a list of things that aren't even close to the title of the video including the title "Movies" as the first 3 items in the list. Any ideas what could be wrong in my setup or is this a bug? Just to confirm this function worked fine for me in V21 on the same Shield platform.

Richard
Viewing all 85666 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>