Hi all, I'm a new user of xbmc, installed using Raspbmc installer from an 8GB SD card to a 15GB Kingston pendrive.
Everything works fine so far (ok not everything, the twitchtv plugin which StateOfTheArt89 is still taking care of, but this isn't the point here).
I'll explain first what do I have now:
My Raspberry still have an SD card plugged in with the Raspbmc installer inside.
A Kingston 16GB pendrive which has XBMC installed (where it boots) plugged in the 1st USB port.
The 2nd usb port has an usb hub where I connect my keyboard, mouse and an 8GB Kingston pendrive (where my movies are stored).
Also the hub has an electrical output in case I plug a portable hard drive (which I can't make it work and peeps, it's an 0.5 TB Verbatim).
XBMC never ever detected my 8GB additional pendrive plugged in the hub, although its green led blinks like if the xbmc were detecting it but it doesn't.
I've checked the system info and the storage shows the same two drives: the 16GB Kingston, and the SD 8GB card, but not the additional pendrive plugged in the usb hub. Also I navigated through /mnt/ and I've found nothing. I've waited 30 minutes and still doesn't show anything. I've tried shutting down my Raspberry Pi, connecting the pendrive and then turning it on, but I've got the same response.
Sorry for my english in case I couldn't explain myself properly. I'll appreciate your help.![Smile]( "Smile")
P.s.: Underlined words mean the pendrive I'm trying to access in XBMC.
Everything works fine so far (ok not everything, the twitchtv plugin which StateOfTheArt89 is still taking care of, but this isn't the point here).
I'll explain first what do I have now:
My Raspberry still have an SD card plugged in with the Raspbmc installer inside.
A Kingston 16GB pendrive which has XBMC installed (where it boots) plugged in the 1st USB port.
The 2nd usb port has an usb hub where I connect my keyboard, mouse and an 8GB Kingston pendrive (where my movies are stored).
Also the hub has an electrical output in case I plug a portable hard drive (which I can't make it work and peeps, it's an 0.5 TB Verbatim).
XBMC never ever detected my 8GB additional pendrive plugged in the hub, although its green led blinks like if the xbmc were detecting it but it doesn't.
I've checked the system info and the storage shows the same two drives: the 16GB Kingston, and the SD 8GB card, but not the additional pendrive plugged in the usb hub. Also I navigated through /mnt/ and I've found nothing. I've waited 30 minutes and still doesn't show anything. I've tried shutting down my Raspberry Pi, connecting the pendrive and then turning it on, but I've got the same response.
Sorry for my english in case I couldn't explain myself properly. I'll appreciate your help.
P.s.: Underlined words mean the pendrive I'm trying to access in XBMC.