Map key on my remote wireless 2.4Ghz device

Hi all I have a big problem to configure my remote device on XBMC.


This is my remote control device:

http://globalsp.ts.fujitsu.com/dmsp/Publ...IV-Air.pdf

This device is working not with infrared, but with WIFI frequence (2.4 Ghz)



This is the list of my input device connected.

****************************
pi@raspbmc:~$ cat /proc/bus/input/devices


I: Bus=0003 Vendor=1784 Product=0014 Version=0111
N: Name="Fujitsu Technology Solutions Presenter IV Air"
P: Phys=usb-bcm2708_usb-1.3.2/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=1f

I: Bus=0003 Vendor=1784 Product=0014 Version=0111
N: Name="Fujitsu Technology Solutions Presenter IV Air"
P: Phys=usb-bcm2708_usb-1.3.2/input1
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.1/input/input1
U: Uniq=
H: Handlers=sysrq kbd mouse0 event1 js0
B: PROP=0
B: EV=10001f
B: KEY=3f0000 70000 10000 7 ff9f207a c14057ff febeffdf ffefffff ffffffff fffffffe
B: REL=143
B: ABS=3
B: MSC=10

I: Bus=0003 Vendor=1784 Product=0014 Version=0111
N: Name="Fujitsu Technology Solutions Presenter IV Air"
P: Phys=usb-bcm2708_usb-1.3.2/input2
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.2/input/input2
U: Uniq=
H: Handlers=sysrq kbd event2
B: PROP=0
B: EV=100013
B: KEY=c0000 400 0 0 0 0 58000 1f8 4000c004 e08effdf 1cfffff ffffffff fffffffe
B: MSC=10
*******************************


I don't understand if this device is recognised like a joystick or a keyboard. On the remote control there is a switch that could be set in different input mode
There are 2 icons on this switch and one of these is like a game pad.



I try to log the device actions when I am pressing the buttons:

tail -F /home/pi/.xbmc/temp/xbmc.log


I have these results (different dependig of switch button position)

1 position:

********************
20:01:31 T:3037749248 DEBUG: ------ Window Init (Pointer.xml) ------
20:01:39 T:3037749248 DEBUG: ------ Window Deinit (Pointer.xml) ------
*********************


I search it on google and I found this post:

http://forum.stmlabs.com/archive/index.p...-1129.html


2 position:

...when I change setting (with the switch button on the remote), it's seem is recognised like a mouse


*********************
left button

20:07:00 T:3037749248 DEBUG: ProcessMouse: trying mouse action leftclick

right button

20:07:45 T:3037749248 DEBUG: ProcessMouse: trying mouse action rightclick
**********************


The up and down button seem to work (but are mapped as PageDown and PageUp, and I need only Up and Down, to be useful):


*************************
Up button

20:10:08 T:3037749248 DEBUG: Keyboard: scancode: 68, sym: 0118, unicode: 0000, modifier: 0
20:10:08 T:3037749248 DEBUG: OnKey: pageup (f084) pressed, action is PageUp

down button

20:10:44 T:3037749248 DEBUG: Keyboard: scancode: 6d, sym: 0119, unicode: 0000, modifier: 0
20:10:44 T:3037749248 DEBUG: OnKey: pagedown (f085) pressed, action is PageDown
**************************



I have try to put keyboard.xml into this path on my raspberry (using: f085/f084 or 68/6d for buttons ID):

.xbmc/userdata/keymaps/keyboard.xml

But doesn't works (I am not sure that this file is loaded during the boot... the system seem to ignore my setting)


I have follow too this procedure to find the id of my buttons (If my device is considered like a joystick)

http://lektiondestages.blogspot.de/2013/...-xbmc.html


I have put my file into (alone, without the file keyboard.xml):

/userdata/keymaps/joystick.remote.xml


Nothing changed.
The remote device function as before. Im not sure that the new setting is applied.



Could anybody can help me?....
Thanks in advance.